With the rapid development of new energy, automotive electronics and industrial control fields, the packaging demand for medium & high power semiconductor devices (such as high-power MOS tubes, IGBT modules, rectifier bridges) is increasing day by day. These devices feature larger carrier tape specs and higher single-reel weight, putting stringent requirements on the outer diameter, load-bearing capacity and structural strength of matching reels. Conventional small outer diameter reels cannot bear heavy tape-and-reel materials, prone to deformation, collapse and feeding jitter.
Targeting the packaging pain points of medium & high power devices, Hatro launches the 13×12 large outer diameter & high load-bearing reel—achieving large-diameter and high-capacity with a 13-inch outer diameter and adapting to mainstream heavy-duty feeding shafts with a 12mm inner diameter. With ultra-strong structural strength and ultra-high load-bearing capacity, it becomes the heavy-duty matching benchmark for medium & high power device tape-and-reel packaging, providing rock-solid bearing and feeding protection for heavy tape-and-reel materials.
13×12 Heavy-Duty Spec, Dual Upgrade of Bearing and Feeding
Designed exclusively for 24mm/32mm large-spec carrier tape of medium & high power devices, Hatro’s 13×12 reel features a full upgrade of core dimensions and performance for the characteristics of heavy tape-and-reel, perfectly matching the mass demand of medium & high power device packaging:
- Large outer diameter & high capacity: The 13-inch large-diameter design greatly expands the winding chamber space, capable of carrying ultra-long 24mm/32mm carrier tape. A single reel of materials can meet the mass placement needs of medium & high power devices, reducing reel change frequency on heavy-duty production lines and improving production efficiency.
- High load-bearing & strong compatibility: The 12mm inner diameter precisely matches the feeding shafts of mainstream heavy-duty SMT pick-and-place machines and taping machines. The stress structure of the shaft hole is optimized to bear high-torque and high-weight feeding needs, with no eccentricity or jitter during high-speed operation, ensuring stable feeding of heavy tape-and-reel.
- Ergonomic design: Despite being a large outer diameter reel, it adopts lightweight structural optimization—on the premise of ensuring load-bearing capacity, the single-reel weight is reasonably controlled, and with a dedicated anti-slip handle, manual loading and reel changes are more labor-saving, reducing the operation intensity of heavy-duty production lines.
Compared with conventional reels, the 13×12 reel has a 200%+ increase in load-bearing capacity, stably bearing the full-load weight of 24mm/32mm carrier tape. Even for long-term storage stacking or high-speed feeding, it maintains structural stability with no deformation or collapse, providing reliable bearing protection for medium & high power device tape-and-reel packaging.
Military-Grade Structure, Ultra-Strong Performance Guards Heavy Tape-and-Reel
The tape-and-reel materials of medium & high power devices are heavy and bear complex forces during transportation and operation, with nearly military-grade requirements for the structural strength and durability of reels. The 13×12 reel is made of military-grade reinforced ABS material modified with glass fiber, through high-pressure injection molding, high-temperature setting and multiple stress tests—its structural strength and durability far exceed conventional industry products:
🌟 Ultra-High Load-Bearing, No Deformation & No Collapse
Professional testing shows that the 13×12 reel can stably bear ≥5kg of heavy tape-and-reel materials per reel, with no bulging or collapse of the chamber after winding and no shrinkage or offset of the shaft hole; it can be stacked in more than 5 layers during storage with no deformation of the chamber and shaft hole, completely solving the pain point of conventional reels being prone to deformation when bearing heavy materials.
🌟 Impact-Resistant & Wear-Resistant, Long Service Life
The reel surface is treated with hard anti-oxidation coating, resistant to impact, scratch and oxidation—no damage from slight collisions during transportation and no paint peeling or aging on the surface for long-term use; the inner side of the shaft hole is treated with tungsten carbide wear resistance with a hardness of over HRC 60, no wear or looseness after repeated plugging and high-speed rotation, and the service life is 3x longer than conventional reels.
🌟 Full-Domain Material Protection, Details Guard Device Safety
The reel edges are polished with thickened rounded corners (50% thicker than conventional reels), more impact-resistant and scratch-proof. During unwinding and rewinding of heavy tape-and-reel, the tape has no scratches or tears; the winding surface features deep-grain anti-slip design with stronger friction, ensuring tight adhesion of heavy tape-and-reel after winding, no interlayer slipping or displacement during transportation and feeding, and avoiding component falling off and damage caused by loose tape.
Automotive-Grade Quality, Adapting to High-End Heavy-Duty Packaging Scenarios
The 13×12 reel is produced in full compliance with the IATF16949 automotive-grade quality system. Raw materials are selected environmentally friendly materials that meet RoHS, REACH and AEC-Q100 standards, with no harmful substance precipitation, adapting to the stringent requirements of high-end fields such as automotive electronics and new energy.
Each batch of reels undergoes more than ten tests including load-bearing limit test, anti-deformation test, wear resistance test and ESD test, with a yield rate of over 99.95%. The size and performance are highly consistent with no batch differences.
At the same time, the reel surface is treated with full-domain ESD protection with surface resistivity stably at 10⁶~10¹⁰Ω/sq, effectively preventing static accumulation, avoiding static electricity from conducting to medium & high power devices through the reel, damaging device electrical performance, and ensuring full-process ESD safety of devices from packaging to placement.
Full Compatibility with Heavy-Duty Packaging, The First Choice for New Energy & Automotive-Grade
Designed for heavy-duty packaging of medium & high power devices, the 13×12 reel is widely compatible with mass production scenarios in high-end fields such as new energy, automotive electronics and industrial control, becoming the core matching choice for heavy-duty tape-and-reel packaging:
✅ Matching carrier/cover tape: 24mm/32mm embossed carrier tape, 21.3mm wide cover tape—perfectly matching Hatro’s same-spec large-size packaging and testing materials.
✅ Matching devices: High-power MOS tubes, IGBT modules, automotive-grade diodes, rectifier bridges, industrial-grade power devices.
✅ Matching equipment: All types of heavy-duty SMT pick-and-place machines, large-spec taping machines, high-speed sealing machines, adapting to mainstream heavy-duty production line equipment.
✅ Application fields: High-end heavy-duty packaging fields such as new energy vehicles, photovoltaic inverters, industrial frequency converters, energy storage equipment and aerospace.
Automotive-Grade Offer: Contact us for a free sample by leaving a message with 13×12 Heavy-Duty Reel, and get an attached automotive-grade test report to experience military-grade heavy-duty matching quality!
