In the semiconductor packaging field, not all production lines are compatible with conventional-spec reels. Some special taping machines, customized pick-and-place machines, and special-shaped device packaging equipment require dedicated reels with large bores and small outer diameters due to their structural particularities. However, such non-standard matching reels often face industry pain points of few categories, low precision and poor compatibility.
With 20 years of experience in the supporting field, Hatro leverages customized R&D and high-precision processing capabilities to launch the 7×16 small outer diameter & large bore dedicated reel—retaining the lightweight advantage with a 7-inch outer diameter and adapting to large-bore feeding shafts of special equipment with a 16mm inner diameter. With precise dimensions and customized performance, it becomes the reliable matching choice for special equipment and special-shaped tape-and-reel packaging, filling the gap in the non-standard matching market.
7×16 Non-Standard Spec, Precisely Matching Special Equipment Needs
Tailored to the structural characteristics of special packaging equipment, Hatro’s 7×16 reel features precise control of core dimensions, perfectly solving the industry pain point of “difficult reel matching” for non-standard equipment:
- 7-inch outer diameter: Retains the small outer diameter lightweight design, adapting to the compact feeding space of special equipment. Manual loading and reel changes are flexible, with direct matching installation without modifying the equipment’s feeding area.
- 16mm inner diameter: Precisely matches the large-bore feeding shafts of special taping machines and customized pick-and-place machines. The shaft hole fits tightly with the feeding shaft with no gaps or looseness, no eccentricity or jitter during high-speed operation, ensuring stable feeding and winding of special-shaped tape-and-reel.
- Customized winding chamber: The height and inner diameter of the winding chamber can be fine-tuned according to the structural characteristics of customers’ special-shaped carrier tape and special devices, achieving tight winding of special-shaped tape-and-reel and avoiding tape distortion and component falling off caused by incompatible winding chambers.
From shaft hole tolerance to end face flatness, the 7×16 reel implements micron-level precision control—shaft hole tolerance ≤0.05mm, end face flatness tolerance ≤0.08mm. Its matching precision with special equipment far exceeds the conventional industry standard, ensuring precise and smooth loading and feeding every time, and completely solving problems such as jamming, offset and abnormal operation of non-standard equipment matching reels.
Customized Performance, Adapting to the Special Needs of Special-Shaped Tape-and-Reel
The packaging of special-shaped tape-and-reel (such as special-shaped cavity carrier tape, wide-edge carrier tape) and special devices has far higher performance requirements for reels than conventional scenarios. The 7×16 reel features exclusive performance optimization for the characteristics of special-shaped tape-and-reel, providing “customized protection” for non-standard packaging:
- Reinforced shaft hole wear resistance: Aimed at the high-frequency and high-torque operation characteristics of special equipment, the inner side of the shaft hole is treated with multi-layer wear-resistant coating with a hardness of over HRC 45. No wear or deformation after repeated plugging and high-speed rotation, maintaining precise matching for long-term use and greatly extending the service life of the reel.
- Anti-slip & anti-distortion design: The winding surface adopts a customized diamond anti-slip texture with uniform and moderate friction. Special-shaped tape-and-reel adheres tightly after winding with no slipping or distortion, and the tape remains flat during transportation and operation, avoiding poor sealing and placement jams caused by distortion.
- Full-domain ESD coverage: Both the reel surface and winding surface are treated with ESD protection, with surface resistivity stably at 10⁶~10⁹Ω/sq and uniform full-domain electrostatic dissipation. It prevents static electricity from conducting to special-shaped tape-and-reel through the reel, avoiding damage to special sensitive devices and ensuring the integrity of device electrical performance.
Exclusive Custom Services, Making Non-Standard Matching Hassle-Free
In addition to the standard 7×16 non-standard reel, Hatro provides full-dimensional customized services, realizing one-to-one exclusive customization of reels according to customers’ special equipment parameters, special-shaped tape-and-reel specs and special device characteristics:
✅ Size customization: Fine-tune shaft hole inner diameter, winding chamber height and reel outer diameter to precisely match customers’ personalized equipment and tape-and-reel needs.
✅ Process customization: Add wear-resistant coating, strengthen ESD process and customize anti-slip texture according to usage scenarios to improve the compatibility of reels with non-standard scenarios.
✅ Appearance customization: Support custom LOGO, batch code and equipment matching model printing for convenient customer material management and production line classification.
✅ Performance customization: Optimize material formula for special usage environments such as ultra-high temperature and ultra-low temperature to improve the environmental resistance of reels.
From demand communication and scheme design to sample prototyping and mass production, Hatro’s professional technical team follows up the entire process—fast sampling in 1-3 days and mass supply in 7-15 days, enabling customers’ non-standard matching needs to be quickly implemented without delaying production line progress due to “difficult-to-match reels”.
Matching Scenarios, Covering All Types of Non-Standard Packaging
The 7×16 reel is widely compatible with various non-standard packaging scenarios, becoming the core matching choice for special equipment and special-shaped tape-and-reel packaging, and covering multiple high-end segmented fields of semiconductor packaging and testing:
✅ Special equipment: Customized SMT pick-and-place machines, special-shaped taping machines, high-precision sealing machines, laboratory-specific packaging equipment.
✅ Special-shaped tape-and-reel: Special-shaped cavity carrier tape, wide-edge carrier tape, ultra-thin carrier tape, customized structure cover tape.
✅ Special devices: Special-shaped sensors, micro optoelectronic devices, customized semiconductor components, precision passive components.
✅ Application fields: High-end non-standard packaging fields such as medical electronics, aerospace, precision instruments and industrial automation.
Custom Offer: Reach out to us for a free non-standard matching solution by leaving a private message with 7×16 Custom Reel, communicate custom needs one-on-one and get fast sampling!
第三篇
TITLE
Hatro 13×12 Reel: Large Outer Diameter & High Load-Bearing, The Heavy-Duty Matching Benchmark for Medium & High Power Device Tape-and-Reel
DESCRIPTION
Hatro 13×12 heavy-duty reel features a 13-inch large outer diameter for high capacity and a 12mm inner diameter for mainstream heavy-duty feeding shafts. Made with military-grade reinforced ABS, it has ultra-strong structural strength and load-bearing capacity, providing rock-solid support for 24mm/32mm carrier tape of medium & high power devices, and is the benchmark for automotive-grade heavy-duty packaging.
KEYWORDS
Hatro 13×12 Reel, Medium & High Power Device Packaging, Automotive-Grade Reel, High Load-Bearing Semiconductor Reel, Heavy-Duty Tape-and-Reel
Hatro 13×12 Reel: Large Outer Diameter & High Load-Bearing, The Heavy-Duty Matching Benchmark for Medium & High Power Device Tape-and-Reel
With the rapid development of new energy, automotive electronics and industrial control fields, the packaging demand for medium & high power semiconductor devices (such as high-power MOS tubes, IGBT modules, rectifier bridges) is increasing day by day. These devices feature larger carrier tape specs and higher single-reel weight, putting stringent requirements on the outer diameter, load-bearing capacity and structural strength of matching reels. Conventional small outer diameter reels cannot bear heavy tape-and-reel materials, prone to deformation, collapse and feeding jitter.
Targeting the packaging pain points of medium & high power devices, Hatro launches the 13×12 large outer diameter & high load-bearing reel—achieving large-diameter and high-capacity with a 13-inch outer diameter and adapting to mainstream heavy-duty feeding shafts with a 12mm inner diameter. With ultra-strong structural strength and ultra-high load-bearing capacity, it becomes the heavy-duty matching benchmark for medium & high power device tape-and-reel packaging, providing rock-solid bearing and feeding protection for heavy tape-and-reel materials.
13×12 Heavy-Duty Spec, Dual Upgrade of Bearing and Feeding
Designed exclusively for 24mm/32mm large-spec carrier tape of medium & high power devices, Hatro’s 13×12 reel features a full upgrade of core dimensions and performance for the characteristics of heavy tape-and-reel, perfectly matching the mass demand of medium & high power device packaging:
- Large outer diameter & high capacity: The 13-inch large-diameter design greatly expands the winding chamber space, capable of carrying ultra-long 24mm/32mm carrier tape. A single reel of materials can meet the mass placement needs of medium & high power devices, reducing reel change frequency on heavy-duty production lines and improving production efficiency.
- High load-bearing & strong compatibility: The 12mm inner diameter precisely matches the feeding shafts of mainstream heavy-duty SMT pick-and-place machines and taping machines. The stress structure of the shaft hole is optimized to bear high-torque and high-weight feeding needs, with no eccentricity or jitter during high-speed operation, ensuring stable feeding of heavy tape-and-reel.
- Ergonomic design: Despite being a large outer diameter reel, it adopts lightweight structural optimization—on the premise of ensuring load-bearing capacity, the single-reel weight is reasonably controlled, and with a dedicated anti-slip handle, manual loading and reel changes are more labor-saving, reducing the operation intensity of heavy-duty production lines.
Compared with conventional reels, the 13×12 reel has a 200%+ increase in load-bearing capacity, stably bearing the full-load weight of 24mm/32mm carrier tape. Even for long-term storage stacking or high-speed feeding, it maintains structural stability with no deformation or collapse, providing reliable bearing protection for medium & high power device tape-and-reel packaging.
Military-Grade Structure, Ultra-Strong Performance Guards Heavy Tape-and-Reel
The tape-and-reel materials of medium & high power devices are heavy and bear complex forces during transportation and operation, with nearly military-grade requirements for the structural strength and durability of reels. The 13×12 reel is made of military-grade reinforced ABS material modified with glass fiber, through high-pressure injection molding, high-temperature setting and multiple stress tests—its structural strength and durability far exceed conventional industry products:
🌟 Ultra-High Load-Bearing, No Deformation & No Collapse
Professional testing shows that the 13×12 reel can stably bear ≥5kg of heavy tape-and-reel materials per reel, with no bulging or collapse of the chamber after winding and no shrinkage or offset of the shaft hole; it can be stacked in more than 5 layers during storage with no deformation of the chamber and shaft hole, completely solving the pain point of conventional reels being prone to deformation when bearing heavy materials.
🌟 Impact-Resistant & Wear-Resistant, Long Service Life
The reel surface is treated with hard anti-oxidation coating, resistant to impact, scratch and oxidation—no damage from slight collisions during transportation and no paint peeling or aging on the surface for long-term use; the inner side of the shaft hole is treated with tungsten carbide wear resistance with a hardness of over HRC 60, no wear or looseness after repeated plugging and high-speed rotation, and the service life is 3x longer than conventional reels.
🌟 Full-Domain Material Protection, Details Guard Device Safety
The reel edges are polished with thickened rounded corners (50% thicker than conventional reels), more impact-resistant and scratch-proof. During unwinding and rewinding of heavy tape-and-reel, the tape has no scratches or tears; the winding surface features deep-grain anti-slip design with stronger friction, ensuring tight adhesion of heavy tape-and-reel after winding, no interlayer slipping or displacement during transportation and feeding, and avoiding component falling off and damage caused by loose tape.
Automotive-Grade Quality, Adapting to High-End Heavy-Duty Packaging Scenarios
The 13×12 reel is produced in full compliance with the IATF16949 automotive-grade quality system. Raw materials are selected environmentally friendly materials that meet RoHS, REACH and AEC-Q100 standards, with no harmful substance precipitation, adapting to the stringent requirements of high-end fields such as automotive electronics and new energy.
Each batch of reels undergoes more than ten tests including load-bearing limit test, anti-deformation test, wear resistance test and ESD test, with a yield rate of over 99.95%. The size and performance are highly consistent with no batch differences.
At the same time, the reel surface is treated with full-domain ESD protection with surface resistivity stably at 10⁶~10¹⁰Ω/sq, effectively preventing static accumulation, avoiding static electricity from conducting to medium & high power devices through the reel, damaging device electrical performance, and ensuring full-process ESD safety of devices from packaging to placement.
Full Compatibility with Heavy-Duty Packaging, The First Choice for New Energy & Automotive-Grade
Designed for heavy-duty packaging of medium & high power devices, the 13×12 reel is widely compatible with mass production scenarios in high-end fields such as new energy, automotive electronics and industrial control, becoming the core matching choice for heavy-duty tape-and-reel packaging:
✅ Matching carrier/cover tape: 24mm/32mm embossed carrier tape, 21.3mm wide cover tape—perfectly matching Hatro’s same-spec large-size packaging and testing materials.
✅ Matching devices: High-power MOS tubes, IGBT modules, automotive-grade diodes, rectifier bridges, industrial-grade power devices.
✅ Matching equipment: All types of heavy-duty SMT pick-and-place machines, large-spec taping machines, high-speed sealing machines, adapting to mainstream heavy-duty production line equipment.
✅ Application fields: High-end heavy-duty packaging fields such as new energy vehicles, photovoltaic inverters, industrial frequency converters, energy storage equipment and aerospace.
Automotive-Grade Offer: Contact us for a free sample by leaving a message with 13×12 Heavy-Duty Reel, and get an attached automotive-grade test report to experience military-grade heavy-duty matching quality!
